sweetjeep
Posts: 170
Joined: 6/1/2001
From: Templeton MA
Status: offline
|
I have a set of RM wheels. Front and rear. Rear has a rotor, and sprocket, no axle. Front has rotor and axle. These were off an RM, but I used the rear on my YZF using a Suzuki sprocket and shimmed the spacers. Worked like a champ. Never tried the front, but I know that the rotor is identical (size and bolt pattern, when I bent my factory rotor Rocky Mtn sent me a Suzuki rotor, and it worked). So I assume that the rest is the same or workable.. but frankly, I'm too lazy to check. $275
|