YZ 105 Bigwheel

YZ 105 Bigwheel - 2009

View related threads: (in this forum | in all forums)

Logged in as: Guest

Users viewing this topic: none

Printable Version

All Forums >> [Miscellaneous Forums] >> [Classifieds Section] >> Bikes For Sale >> YZ 105 Bigwheel - 2009

Page: [1]

Message

<< Older Topic Newer Topic >>

YZ 105 Bigwheel - 2009 - 1/8/2012 2:15:05 PM

sleddogg

Posts: 47
Joined: 9/20/2010
Status: offline

2011 NETRA HS and Jr Enduro Bigwheel championship bike, as well as PSTR short course Bigwheel Championship YZ 105 also.

Purchased new in 2010, ridden in mini class as an 85 last year. This is our race bike, and only ridden on race day after May, our old race/practice bike already sold.

Motor bored to 105 along with case mods in May this year, and crank and mains done for good measure at this time. Bore is US chrome, head is mild cut, and runs perfectly on pump gas. All motor work was done by Chris Chrispin at Bubbas motorsports. HAVE ALL RECIEPTS for you.

Carb jetted to big bore kit, and runs super clean, no spooge, and has had the same plug all year. Power is smooth but fast, with no big hit ..... good woods motor. If you needed more, you can go to a higher compression head. FMF exhaust/silencer, give it good boost off the bottom compared to stock pipe. Passes NETRA sound about 94 db.

Suspension is by C Cycle, and in a word is superb. Valved for fast woods work, sprung for 110-120 pound rider. This bike also features the long swingarm, and they are like hens teeth to find, and the swingarm alone is a big $$ item !!

Newer parts - New clutch plates and metals (steel) last week, basket shows no grooves and is smooth actuating and starts perfectly in gear ...... lots of holeshots this year. New 428 "O" ring and sprockets, newer rear disc. Forks and shock had the oil changed in September. New piston ring also in Sept, piston good at that time. Linkage serviced regularly, air filter EVERY ride, tranny oil as well. Clutch and throttle cables new in September also. Bib mousse, and believe me, you need this on a big wheel. Wheel bearings are checked and changed as needed. New radiator, and has radiator guard installed. Of course, barkbusters also, tall soft and tall medium seat.

This is James Murphy's bike, and if you check bigwheel results on NETRA site, you can check results. Good affordable, reliable race bike with no bent crap or wierd mechanical issues...... kick and go!! Asking $1600.00